https://youtube.com/watch?v=AJk6I2b6eqA%3Flist%3DPL9BQapgvMETFcMQsuO41iOIrSP2B_cMeJ
Category: Content
Web Site Terms and Conditions of Use and Privacy Policy
- modify or copy the materials;
- use the materials for any commercial purpose, or for any public display (commercial or non-commercial);
- attempt to decompile or reverse engineer any software contained on Red Eagle Technologies’s web site;
- remove any copyright or other proprietary notations from the materials; or
- transfer the materials to another person or “mirror” the materials on any other server.
- This license shall automatically terminate if you violate any of these restrictions and may be terminated by Red Eagle Technologies at any time. Upon terminating your viewing of these materials or upon the termination of this license, you must destroy any downloaded materials in your possession whether in electronic or printed format.
- Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
- We will collect and use of personal information solely with the objective of fulfilling those purposes specified by us and for other compatible purposes, unless we obtain the consent of the individual concerned or as required by law.
- We will only retain personal information as long as necessary for the fulfillment of those purposes.
- We will collect personal information by lawful and fair means and, where appropriate, with the knowledge or consent of the individual concerned.
- Personal data should be relevant to the purposes for which it is to be used, and, to the extent necessary for those purposes, should be accurate, complete, and up-to-date.
- We will protect personal information by reasonable security safeguards against loss or theft, as well as unauthorized access, disclosure, copying, use or modification.
- We will make readily available to customers information about our policies and practices relating to the management of personal information.
- We are committed to conducting our business in accordance with these principles in order to ensure that the confidentiality of personal information is protected and maintained.
The goals of Red Eagle Technologies are
· To provide solutions that insure that the tools we use to make our life better “work and last” beyond expectations.
· To help people pass on their tools to generations that follow.
Gun Protect™ is a family of products that helps guns last for generations!
· To stand behind our products 100% – See our No Hassle Warranty for proof.
· To provide Golden Rule service – this means that even the company president is accessible to all customers.
Retail
Look for our displays at Academy Sports and other fine retailers. | |
![]() |
![]() |
NO HASSLE WARRANTY
At Red Eagle Technologies, we stand behind all of our products 100%. If you are not 100% satisfied within 90 days of purchasing any of our products, return the product(s) to us with proof of purchase. We will reimburse you the MSRP of that product plus $5 to cover your shipping cost and inconvenience. You can always contact us with comments and suggestions at
soundoff@mygunprotect.com.
We make no warranty, express or implied, as to the suitability of any of our products for any particular use, and we shall not be subject to liability from any damages resulting from operations not under our direct control. This warranty is exclusive of all other warranties, express or implied, and no representative of ours or any other person is authorized to assume for us any other liability in connection with the sales of our products. Liability under this warranty is limited to the MSRP plus a $5 reimbursement of Shipping and Handling.
GUN PROTECT Weapon Cloaks™
The Weapon Cloak uses Corrosive Inhibiting Skin (CIS) Technology. Once sealed, the CIS vapor from the Weapon Cloak emits and adheres to the metal parts of the weapon, including inner barrel and action. This provides a molecular “skin” that prevents corrosion. The Weapon Cloak is safe for Scope Optics. The Weapon Cloak shelf life is 12 months for Sporting and 24 months for Tactical. You can purchase Weapon Cloaks separately in sizes for long guns and pistols.
![]() |
![]() |
To Use Weapon Cloak • UNLOAD WEAPON – TURN SAFETY ON • Treat and clean gun with Gun Protect Spray Shield and Weapon Wipe • Insert gun inside Weapon Cloak • Use Weapon Wipe to keep fingerprints off metal parts • Close Weapon Cloak with recloseable Z-Tie clip (provided) • Mark label on Weapon Cloak with date installed • If Cloak is punctured simply tape over the hole and Cloak will remain fully functional • To store Cloak when not in use, fold tightly and hold secure with recloseable Z-Tie clip.
{product id=13} | {product id=12} |
{product id=4} | {product id=3} |
{product id=8} | {product id=9} |
Frequently Asked Questions
Q: Can I bury my weapons once I put them in the Cloak?
A: Yes you can. However, you must insert the cloaked weapon in a non-degrading container. The Cloak will
degrade over time underground from the acidity of the dirt. There needs to be a non-degrading barrier between the Cloak and the dirt.
Q: Will the CIS molecules damage my synthetic stock or my optics?
A: No. The CIS molecules will not harm stocks or optic glass.
Q: How do I know CIS is working if I can’t see it?
A: While it’s true you cannot see the CIS technology at work, the proof is simple. Automotive companies store complete engines in bags similar to Cloaks. These engines can be stored in extreme conditions for long periods of time. Once those bags are opened, the engines go directly into the car and are used immediately. The military stores entire tanks, weapons and parts in similar bags.
CIS technology is more advanced, lab tested and scientifically proven.
Q: Will Spray Shield harm my optic glass?
A: We only recommend that optic glass be cleaned and treated with the optic manufacturer’s recommended
solutions.
Q: If my Cloak gets a hole in it, do I have to get a new Cloak?
A: Not necessarily. You can repair punctures with a piece of tape. The idea is to not allow air inside the Cloak. However, if your Cloak is ripped or torn beyond repair, we highly recommend that it is promptly replaced.
Q: I bought two twin packs of the Safe Environment Modules. Is it overkill to have three modules in my safe?
A: That depends on the size of your safe. If your safe is 41-59 cubic feet, then three modules would be better. Safes that are 21-40 cubic feet in size need two modules. If the safe or case is under 21 cubic feet only one module is needed. Each Module is designed to protect 20 cubic feet.
Q: I take the treated weapon Wipes with me when I hunt. Do I need to worry about the scent?
A: Treated Weapon Wipes have a very faint scent. Once the weapon is wiped down, store the Weapon Wipe in the bag
provided and close it. Any faint scent exposed during use will dissipate quickly.
Q: How long will Spray Shield last on my weapons?
A: That depends on the environment. The big advantage for Spray Shield is its low viscosity. It will dissipate over time, However, if the environment is arid it will dissipate quicker than if it was humid. Be sure to protect your weapon completely by storing your cleaned weapon in Gun Protect Weapon Cloaks.
Bullet Points – Research
Spray Shield
- Used by US Military on guns, bomb racks and missile launchers.
- Made in USA.
- Stable to minus 70 degrees Fahrenheit. This is the reason guns fire, bombs drop and missiles launch at 45,000+ feet.
- Repels and displaces moisture. If a weapon is dropped in a lake or pond, clean the weapon normally and apply Spray Shield.
- Use the Weapon Wipe to apply Spray Shield. It has 256 micro-cavities per square inch to lift the maximum impurities off of weapons.
- Both Weapon Wipes in the Tactical Grade are treated with Spray Shield.
- Sporting Grade Weapon Wipes have one treated with Spray Shield and one untreated.
- Anti-Static. Dust and dirt are not attracted once Spray Shield is applied.
- Protects, lubricates and cleans at the molecular level in a single application.
![]() |
![]() |
Corrosion Inhibiting Technology – Ammo & Weapon Cloaks – Safe Environment Modules
- Cloaks and Safe Environment Modules are infused with Corrosion Inhibiting Skin (CIS) Technology.
- CIS molecules are attracted to and attach to all metal parts.
- The CIS molecules are heavier than water and air. The molecules can penetrate anywhere air can go.
- CIS molecules go directly from a solid state to a gas state without going through the moisture state. This means immediate contact and protection.
- CIS is the newest and most advanced technology available.
- There are other corrosion protection products on the market. If they don’t contain the advanced technology of CIS, we would not recommend it.
- This CIS technology is used by US Military on guns and equipment, including wrapping entire tanks for corrosion protection.
- Similar technology is used in the industrial and automotive sectors. Engines, transmissions and other valuable parts are stored and sealed in bags similar to the Cloaks. After long periods of storage, these items are 100% corrosion free and immediately used on vehicles.
- All Cloaks, Safe Environment Modules, Weapon Wipes and Spray Shield are Made in the USA.
- Once Cloaks are sealed, the CIS molecules are activated. They emit from inside the Cloak and attach to all metal parts. Weapons are ready to use right out of the Cloaks.
- You can remove the weapon from the Cloaks numerous times as long as the Cloaks are rolled up when not in use. Protection period factors in multiple openings.
- Weapons are ready to use when removed from the Cloak. CIS molecules dissipate when the Cloak is opened. There will be zero residue on the weapon from the Cloak.
- When gun safes or cases are closed, the Safe Environment Modules emit the CIS molecules and attach to all metal parts.
- Do not unwrap the modules unless they are ready for use.
- Cloaks and Safe Environment Modules provide corrosion protection at the molecular level.
Laboratory Test #5444
End User: Red Eagle Technologies / Gun Protect Products
Testing: Confidential November 2012
Testing Contact: Confidential
Conclusions
Corrosion can be prevented on the customer’s metal parts using a combination of both Gun Protect Spray Shield and Gun Protect Weapon Cloak with CIS (Corrosion Inhibiting Skin) Technologies.
Objectives
Show the effectiveness of Gun Protect corrosion prevention products on gun barrel parts submitted by the customer.
Corrosion Inhibition Rating Legend
Methodology
Contact Corrosion Test
-Evaluation testing to show how effective the CIS material is on designated metals when in direct contact
-Conditions – run continuously at 120°F, 100% R.H.
Parts tested with Gun Protect Weapon Cloak were first dipped into Gun Protect Spray Shield prior to being placed in the CSI Cloak bag.
Testing was run in duplicate.
Test Products
Control: Plain poly film, non -CIS.
Gun Protect Weapon Cloak poly, 4 mil: Corrosion Inhibiting Skin for long-term multi-metal protection.
Gun Protect Spray Shield for corrosion protection on steel.
Test Setup Photos
Test Photos
Conclusions and Recommendations
While there is no direct correlation between lab testing hours and “real world” exposure, common rule is that 120 hours of protection would roughly equal 12 months of exposure. Left unprotected, gun barrels will develop corrosion over time. The proposed system of Gun Protect Spray Shield and Gun Protect Weapon Cloak poly bags with a twist tie closure will effectively protect the metal surfaces for the advertised time period of 12 months.